The composition of the small house lift:
- Power system: hydraulic pump station
- Lifting device: hydraulic cylinder, pulley block, and steel wire rope
- Passenger (cargo) carrying device: car
- Guiding device: guide rail
- Control System
The small house lift have the following characteristics:
- There is no need to set up a machine room with high requirements and costs above the shaft.
- The computer room is set flexibly. The hydraulic transmission system relies on the oil pipe to transmit power so that the machine room can be arranged within 5m away from the shaft
The area occupied by the computer room is only 4-5 square meters.
- The requirement of shaft structure strength is low. Due to the vertical load, such as the self-weight and load of the hydraulic elevator car, all of them act on the shaft through the hydraulic cylinder
On the foundation, the requirement of building performance on the top of the shaft is low.
- Good safety and high reliability.
- Large load capacity. The hydraulic elevator lifts the car based on the principle of a hydraulic jack. Multiple oil cylinders can be used to lift the car at the same time
- Low noise. The hydraulic system can be set far away from the shaft to isolate the noise source.
Use and maintenance
For the hydraulic small house lifts, the structure is simple, and the failure rate is low.
It is convenient for rescue. When the hydraulic elevator goes down, it is driven by the pressure generated by its own weight. In case of power failure or failure, it only needs to open the emergency drop valve. Visit us now!