The small freight elevator has low maintenance costs and is suitable for lifting goods (including pallet goods) to the mezzanine and balcony.
The size of the carriage of this hydraulic system elevator is 1.5 meters wide by 1.5 meters long, which is enough to hold the tray, and the vertical height can reach 10 meters. It is suitable for indoor or outdoor use and can get two levels.
The small elevator is also called single mast freight elevator. Unlike the double guide rail freight elevator, the small freight lift has only one side with guide rails. The whole freight elevator runs up and down on the guide rail side. The guide rails bear the weight of goods. The small freight elevator occupies a small area and is easy to install. It can be accessed from any three sides to facilitate the loading and unloading of goods. This small freight elevator made and produced in China can be customized according to the site; table size can be designed according to requirements.
Small cargo elevators are widely used in various engineering-related industries and manufactured according to Chinese industry standards, ensuring perfect performance and longer service life. We strictly test the durability, performance, corrosion resistance, bearing capacity and other parameters of this equipment to ensure that they meet customers’ expectations at home and abroad.
The small elevator is a non-scissors type lifting platform equipment used for transporting goods between the second or third-floor factory buildings, restaurants and restaurants. The lowest lifting height of the equipment is 150-300mm, especially suitable for workplaces where the pit cannot be dug, and it can be installed without a machine room
Advantages of small freight elevators: Small freight elevators designed and manufactured with shallow pits have the characteristics of stable lifting, fast speed, long service life, easy maintenance and maintenance, and do not require unique machine rooms. They are strata buildings and substitutes for elevators.
Features of small cargo elevators made in China:
Widely used in shipbuilding, construction, civil engineering, advertising and other fields
Provide aerial work platform
Support the demand for safe and reliable use
Provide excellent service performance
The mechanical structure is designed for stable lifting
Comprehensive working platform, high bearing capacity
Use a skid plate and overload protection bracket.
For the device support to prevent the platform from falling suddenly, the hydraulic system of the product shall be equipped with anti-falling and interactive interlocking of upper and lower doors.
The support of the manual release valve and guardrail can be used safely. The operating buttons can be set on the work table of the lifting table to achieve multi-point control.
Structural advantages of small freight elevators manufactured in China:
1.The load and load of a small hydraulic cargo elevator directly act on the foundation pit through the oil cylinder, and the shaft strength requirements are low. The brick structure or brick concrete structure shaft is enough;
2. No machine room is required above the hoistway, and the top floor can be installed at the height of more than 2.8m;
3. The hydraulic cargo elevator is not equipped with a counterweight device to improve the utilization rate of the hoistway area;
4. The control system can be set within 3-5 meters of the shaft radius, occupying a small area.
5. Small guide rail type lifting platform is customized according to customer requirements.
6. From the first floor to the second floor: the lift is 3-4 meters, the load is less than 1 ton, and the table top is within 2 meters;
From the first floor to the third floor: rise 6-8m, the load is less than 1t, and the table top is less than 2m;
Precautions for the operation of the small hydraulic goods elevator:
- The lifting table must be placed on the flat and hardened ground to prevent tipping during operation.
- Work according to the load specified by the cargo elevator, and overload is strictly prohibited. In emergency, a maximum of 10% temporary overload is allowed.
- The weight of goods shall be evenly distributed in the centre of the platform. The longitudinal eccentric load shall not exceed 1/2 of the rated load, and the transverse abnormal load shall not exceed 1/3 of the rated load.
- The goods elevator is mainly used to transport goods, and it is forbidden to carry people. The lifting platform for bringing people should be equipped with railings and explosion-proof valves to prevent the workbench from falling out of control due to the rupture of oil pipes.
- Prevent hands and clothes from being squeezed when the small elevator works.
- If the lifting platform fails to lift and the overflow valve sounds abnormal, stop the machine immediately for an inspection. Otherwise, the oil pump will overheat rapidly and suffer severe damage. The overflow valve is used to protect the safety of the machine and operators and shall not be adjusted arbitrarily.
- Press the “Up” or “Down” button to lift the workbench. If the workbench does not move, stop the machine immediately for an inspection.
- The heavy objects can be unloaded only when the worktable stops moving.
There are no reviews yet.